Hi!
I came across very strange behavior of some XT-ZB1.
Only some of XT-ZB1 I tested are starting the main application of otcli (bl702_demo_thread) example from bl_iot_sdk repo.
All of them could start bl702_demo_lmac154 example and everything is working just fine.
Below I post the output of working and non-working MCUs:
- Working case:
Starting bl702 now....
------------------------------------------------------------
RISC-V Core Feature:RV32-ACFIMX
Build Version: release_bl_iot_sdk_1.6.39-238-gf5ba0a7ee
Std BSP Driver Version: dff9318
Std BSP Common Version: 9fe1995
RF Version: b5662bc
Build Date: Feb 22 2023
Build Time: 10:20:53
------------------------------------------------------------
Heap 66936@0x4201f288, 0@0x00000000
[IRQ] Clearing and Disable all the pending IRQ...
[ 0][BUF: hal_board.c: 337] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[ 0][BUF: hal_board.c: 355] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[ 0][BUF: hal_board.c: 450] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[ 0][BUF: hal_board.c: 451] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[OS] Starting aos_loop_proc task...
[OS] Starting OS Scheduler...
[MTD] >>>>>> Hanlde info Dump >>>>>>
name PSM
id 0
offset 0x001f9000(2068480)
size 0x00002000(8Kbytes)
xip_addr 0x231f5000
[MTD] <<<<<< Hanlde info End <<<<<<
[EF] Found Valid PSM partition, XIP Addr 231f5000, flash addr 001f9000, size 8192
ENV AREA SIZE 8192, SECTOR NUM 2
*default_env_size = 0x00000001
ENV start address is 0x00000000, size is 8192 bytes.
EasyFlash V4.0.99 is initialize success.
You can get the latest version on https://github.com/armink/EasyFlash .
ot_alarmInit = 107
[BL] [SEC] TRNG Handler
[BL] [SEC] TRNG Handler
[MTD] >>>>>> Hanlde info Dump >>>>>>
name PSM
id 0
offset 0x001f9000(2068480)
size 0x00002000(8Kbytes)
xip_addr 0x231f5000
[MTD] <<<<<< Hanlde info End <<<<<<
[EF] Found Valid PSM partition, XIP Addr 231f5000, flash addr 001f9000, size 8192
ENV AREA SIZE 8192, SECTOR NUM 2
*default_env_size = 0x00000001
EasyFlash V4.0.99 is initialize success.
You can get the latest version on https://github.com/armink/EasyFlash .
- Not working case:
Starting bl702 now....
-----------------------------------------------------------
RISC-V Core Feature:RV32-ACFIMX
Build Version: release_bl_iot_sdk_1.6.39-238-gf5ba0a7ee
Std BSP Driver Version: dff9318
Std BSP Common Version: 9fe1995
RF Version: b5662bc
Build Date: Feb 22 2023
Build Time: 10:20:53
------------------------------------------------------------
Heap 66936@0x4201f288, 0@0x00000000
[IRQ] Clearing and Disable all the pending IRQ...
[OS] Starting aos_loop_proc task...
[OS] Starting OS Scheduler...
[MTD] >>>>>> Hanlde info Dump >>>>>>
name PSM
id 0
offset 0x001f9000(2068480)
size 0x00002000(8Kbytes)
xip_addr 0x231f5000
[MTD] <<<<<< Hanlde info End <<<<<<
[EF] Found Valid PSM partition, XIP Addr 231f5000, flash addr 001f9000, size 8192
ENV AREA SIZE 8192, SECTOR NUM 2
*default_env_size = 0x00000001
ENV start address is 0x00000000, size is 8192 bytes.
EasyFlash V4.0.99 is initialize success.
You can get the latest version on https://github.com/armink/EasyFlash .
ot_alarmInit = 106
[BL] [SEC] TRNG Handler
[BL] [SEC] TRNG Handler
[MTD] >>>>>> Hanlde info Dump >>>>>>
name PSM
id 0
offset 0x001f9000(2068480)
size 0x00002000(8Kbytes)
xip_addr 0x231f5000
[MTD] <<<<<< Hanlde info End <<<<<<
[EF] Found Valid PSM partition, XIP Addr 231f5000, flash addr 001f9000, size 8192
ENV AREA SIZE 8192, SECTOR NUM 2
*default_env_size = 0x00000001
EasyFlash V4.0.99 is initialize success.
